제품 상세정보
원래 장소: 중국
브랜드 이름: RION
인증: CE,
모델 번호: HDA436T
문서: HDA436T DIGITAL OUTPUT DYNA...OR.pdf
지불과 운송 용어
최소 주문 수량: 1
가격: $161.00/Pieces
포장 세부 사항: 판지
배달 시간: 5 ~ 8 근무일
지불 조건: 티/티
공급 능력: 1000/월
선택적인 출력: |
RS485/232/TTL |
동적 정확도:: |
± 0.1 ° |
정적 정확도: |
±0.05° |
제진 테이블: |
10grms /10~1000Hz |
선택적인 출력: |
RS485/232/TTL |
동적 정확도:: |
± 0.1 ° |
정적 정확도: |
±0.05° |
제진 테이블: |
10grms /10~1000Hz |
HDA436T DIGITAL OUTPUT DYNAMIC TILT SENSOR.pdf
HDA436T A new generation of digital MEMS dynamic tilt sensor.It can measure the attitude parameters (roll, pitch, and azimuth) of a moving carrier,and suitable for tilt angle measurement under motion or vibration.HDA436T has a built-in high-precision acceleration and gyro sensor,and integrates the Kalman filter algorithm ,which can measure the real-time motion data of the carrier under motion or vibration.The signal output modes such as RS485 / RS232 /TTL are optional,and the scalability is strong.
This product adopts non-contact measuring principle ,which can output the current attitude and inclination in real time.It is simple to use and does not need to retrieve the relative changes of the two surfaces.Internally integrated high-precision AD and high-precision gyro units to compensate for non-linear,orthogonal coupling,temperature drift and centrifugal acceleration in real time;greatly eliminate centrifugal errors caused by motion acceleration interference, improve product dynamic measurement accuracy;adapt to long-term complex movements Work in places and harsh environments.The product is a dynamic and static dual-mode measurement sensor with strong resistance to external electromagnetic interference.It is suitable for all kinds of large-scale and high-strength shock and vibration industrial environments ,and is an ideal choice for industrial automation control and measurement of attitude.
| HDA436T | Condition | Parameter | |
| Measure range | - | Roll±180°, pitch±90°, azimuth±180° (initial value at power-down is 0°) | |
| Measure axis | - | X axis / Y axis / Z axis | |
| Roll&Pitch Static accuracy1) | - | ± 0.05° | |
| Roll&Pitch Dynamic accuracy | @25℃ | ± 0.1° | |
| Gyro | range | - | ±250°/s |
| Zero bias stability (10s Smooth) | - | 8.5°/h | |
| Angle random walk coefficient(allan) | - | 0.25°/sqrt(h) | |
| Acceleration | range | - | ±8g |
| Bias stability(10s mean) | - | 0.1mg | |
| Bias instability(allan) | - | 0.005mg | |
| Speed random walk coefficient(allan) | - | 0.005m/s/sqrt(h) | |
| Zero point temp. Coefficient2) | -40～85℃ | ±0.01°/℃ | |
| Sensitivity temp. Coefficient3) | -40～85℃ | ≤100ppm/℃ | |
| Power-on startup time | ≤3.5S | ||
| Response time | 0.01S | ||
| Output signal | RS485/RS232/TTL | ||
| Electromagnetic compatibility | According to EN61000 and GBT17626 | ||
| MTBF | ≥ 98000 hours / time | ||
| Insulation resistance | ≥100 Megohm | ||
| Impact resistance | 100g @ 11ms,3 axial direction (half sinusoid) | ||
| Anti-vibration | 10grms / 10～1000Hz | ||
| Waterproof level | Standard IP67, optional IP68 and corrosion-resistant IP68 protection level | ||
| Weight | Standard shell ≤ 165g, IP68 shell ≤ 510g (including 1m cable) | ||
|
1)Accuracy: refers to the root mean square difference between the measured and actual angle value by multiple measurements (>16 times) under normal temperature.
2)Zero temp. drift coefficient: the change rate of the indication value relative to normal temperature within the rated operating temperature range of the sensor at the zero degree. 3)Sensitivity temp. drift coefficient: The percentage change rate with temperature of the full-scale indication relative to the full-scale indication at room temperature of the sensor in its rated operating temperature range. |
|||
Tags:
